- Services 
for Dilution Instrumentation
-
In-situ
Dilution Probe
Standard Service -- SRVC-PRB-A:
Inspection, cleaning, testing and provide performance
data of In-situ and Out of Stack Diluting Probe Aspirators.
in-depth...
In-situ
Dilution Probe
Line Repairs -- SRVC-PRB-A9:
Repair/Reinforcement of the 3 solder joint locations on
the probe lines. This service is only available for units
that qualify, based on evaluation and overall condition of
the probe lines before and after the solder joint areas.
in-depth...
In-situ Dilution Probe
Extended Service
-- SRVC-PRB-A3~5:
Repair of In-situ and Out of Stack Diluting Probe Aspirators
(also includes Standard Service). This service is for damaged
probes that require partial disassembly for minor repairs
and parts replacement and re-welding.
In-situ Dilution Probe
Repair/Refurbish Service
-- SRVC-PRB-A6:
Overhaul of In-situ Diluting Probe Aspirators. This service
is for damaged probes that require such repairs as internal
aspirator replacement (includes all new internal and external
lines/tubing), or replacement of all external parts around
original aspirator (includes all new internal and external
lines/tubing). Call for more information or instrument evaluations.
Out of Stack Dilution System
Full
Service
-- SRVC-PRB-B:
Complete system service includes replacement of all gaskets
& seals, bypass-pump cleaning and performance testing,
Pyrex critical orifice inspection/cleaning/testing and provide
performance data (also includes Standard Service for diluting
aspirator). Extra charges are applied for replacement of defective
parts (non-consumables).
in-depth...
Out-of-Stack Diluter Upgrade
Upgrade Service
-- SRVC-PRB-B2:
This service is for the EPM "-S" series
out-of-stack diluting sampler. The service consists of converting
the 3/4" stainless steel ferrules configuration at the
diluter-tip, to a 3/4" graphite ferrule seal. This configuration
facilitates easier maintenance and reduces the possibility
of leakage at diluter-tip.
in-depth...
Out of Stack Dilution System (w/Inertial Filter)
Full Service -- SRVC-PRB-C:
Complete system service includes the cleaning of all system
lines, by-pass-pump (eductor) and inertial filter. Monel®
critical orifice inspection/cleaning/testing and provide performance
data (also includes Standard Service for diluting aspirator).
Extra charges are applied for replacement of defective parts
(non-consumables).
OOS Bypass Pump
Standard Service -- SRVC-BPP-A:
Inspection, cleaning, testing and provide performance data
of bypass pump ("High Efficiency" or "High
Air Consumption type") that are used with Out of Stack
Diluting Probes.
Critical Orifice Service (Monel® Type)
-- SRVC-CO-A:
Inspection, cleaning & testing of critical orifice and
provide performance test data. This service is for critical
orifice used with Diluter Panels, Diluter Pumps, and Inertial
Filtered Out of Stack Probes.
Critical Orifice Service (Pyrex®/Quartz type)
-- SRVC-CO-A~B:
Inspection, cleaning & testing of critical orifice, includes
replacement of fine filter and provide performance data. This
service is for critical orifice used with In-situ and Out
of Stack Probes.
Any other charges required during instrument servicing (that
is not noted above) would be quoted on a case by case basis.
The above noted services that require aspirator disassembly/repair,
or full system overhauls are for preliminary estimates only.
We will typically evaluate the system at our shop and submit
a formal quotation before any work is performed. There is
no charge for any of our evaluations!!
Get a Service Quote ...
Click Here
to view or download full details in printer friendly PDF format.
Next
|
